In the northern hemisphere, fall has arrived and is well settled, and some of you may park their bike at the garage waiting for next spring. Wether you’re in this case or not, the comings months could be suitable to bring a few modifications to your motorcycle.
During last summer,our team worked to design new parts dedicated to the Triumph’s Modern classic range of motorcycles. Quite all the required parts to improve your new Bonneville T100 / T120, Street Twin / Street Scrambler and Thruxton 1200 are now available, in way that respects the britannic firm spirit. Leather goods, lowering kits, blinkers brackets, handlebar clamps, long cables kit… BAAK brought a chic touch to those parts that will enable you achieve your project in an harmonious way.
Already offered for the previous versions of the Triumph Bonneville, our Short leather seat kit is now available for the new Triumph range of motorcycles. It enables to reduce the length of the stock seat by 18cm and get a more compact look while keeping two seat places. This kit includes the leather seat handcrafted over a HDPE seat pan and JUMP foam, a tiny rear mudguard with license plate support / lightning, a taillight, an indicators bracket and our machined aluminium rear subframe. The assembly doesn’t require to weld anything.
BAAK now offers the solution to assemble a wide handlebar on your new Triumph Bonneville T100 / T120, Street Twin / Street Scrambler and Thruxton 1200. This kit is composed of a front brake hose extension and a clutch cable. Those parts are required to mount any wide handlebar, get a more comfortable riding position, a better handling and a different look.
LEATHER SEAT(S) FOR TRIUMPH THRUXTON 1200
You’ve been many asking us to develop a few leather parts to improve the look of your Triumph Thruxton 1200. So we designed two models of seats dedicated to the Thruxton : A flat look seat which enables to improve the tail of the bike while keeping a space for the passenger, and a pure Racer looking seat with classic ribs. These two seats are handcrafted on the base of Triumph factory seats pans so it can be perfectly compatible and enable to keep the seat lock system.
Among the basic modifications for a custom project, the relocation of the indicators is a good way to improve the look of a Triumph. This kit of front and rear indicators brackets suits the Triumph Factory turn signals that have a keyed connection on their fixation. It will enable you to relocate your front turn signals below the steering column, and on the upper shock absorbers on the rear end.
This Fatbar handlebar (28,6mm at the center – 22mm at the ends) is satin black powder coat painted, it enables you to offer a stronger look to the end of your ride. Equipped with a crossbar covered with leather, it adds a touch of chic to the handlebar. This part comes with machined aluminium handlebar risers and the necessary stainless steel screwing kit. It suits most of the bikes with 22mm original handlebar : Triumph Bonneville SE, Scrambler, Street Twin and Street Scrambler, Moto Guzzi V7 and V9.
The Moto Guzzi V9 is a machine with a strong personality. Its look convinced many enthusiasts of the Italian brand. However, some finish details needed to be improved and led us to design a few parts dedicated to the V9. This leather seat is handcrafted over a factory Moto Guzzi seat pan to keep it fully compatible and keep the seat lock system. The foam is isolated from the leather with a waterproof plastic cover, and the classic-ribbed leather cover is available in 4 different colors.
If you want to mount a wide tire on your Triumph new generation (after 2016), you have to go for a wider triple yokes so the tire don’t touch the fork while riding. This is the solution we used on our Triumph Bonneville T120 Bobber. This kit includes the upper and lower triple trees 10mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. It also enable to lower the front end by 25mm for a more compact look.
This upper triples trees enables to lower the front end of the Bonneville T100 / T120, Street Twin / Street Scrambler and Thruxton 1200 and clear the front end of your motorcycle. It enables you to mount your original speedometer and / or your ignition switch on it. It comes with aluminium handlebars clamps and the necessary screwing. That is the solution we used for our Triumph Bonneville T120 Dandy Bonnie and Thruxton 1200 Tracker.
Designed by ourselves in order to be effective and beautiful, these machined aluminium handlebar risers enables to mount 1 inch (25,4mm) and Fatbar (28,6mm) diameter handlebars on any bike. It will visually clear the front end of the bike with great satin black powder coat painted parts. It comes with the necessary screwing.