Home > The blog > Parts options guide
1 July 2018

Parts options guide

Learn more about the options we offer for our motorcycle parts: turn indicators positions and models, leather seats quilting, license plate mount positions, leather colors… Then you can make sure you select the right product for your project.


TURN INDICATORS POSITIONS

Choose the position of the turn indicators of your rear mudguard or license plate mount depending on the look you aim at for your motorcycle.


TURN INDICATORS MODELS

We selected these blinkers for their manufacturing quality, and to offer several choices so it can match your custom motorcycle project.

Mini 21W turn indicators

These bulb mini turn indicators offer 21W of power. The bulbs can be replaced by our Turn indicators bulbs. Their casings are made out of plastic. Their threaded shafts are Ø10mm diameter. It’s EU approved for road use.

Round 21W turn indicators

These bulb Round turn indicators offer 21W of power. The bulbs can be replaced by our Turn indicators bulbs. Their casings are made out of aluminium, their glasses are transparent. Their threaded shafts are Ø10mm diameter. It’s EU approved for road use.

Basic 10W turn indicators

These mini turn indicators offer 10W of power. Their casings are made out of plastic. Their threaded shafts are Ø10mm diameter. It’s EU approved for road use.

Mini LED 10W turn indicators

These Mini LED turn indicators offer 10W of power. Their casings are made out of aluminium and extremely discreet. Their threaded shafts are Ø8mm diameter. It’s manufactured in Germany by Motogadget and EU approved for road use.


LICENSE PLATE MOUNT POSITION

A side (left) license plate mount will clear the front end of your motorcycle, but it will provide a poor protection against the rear wheel splashes compared to a classic rear position license plate mount.


LEATHER COLORS

The leather work is entirely completed at our workshop using full grain  leather carefully selected and bespoke-tanned for BAAK in Italy. Our leather go through a double-tanning (chrome and vegetal), the leather of one same color get the same patina other the years. We use a cream color thread for black, gold and brown leather, and black color thread for ruby leather.


LEATHER SEATS QUILTING

We offer several quilting options for the seating area of the seats manufactured at our workshop. All these options are not available for each seat. The measurements of the quilting can be slightly different, each seat is unique due to the handcrafted manufacturing.

Classic quilting

For a Classic quilting, the stitching on the seating area run across the width. Measurements of the pattern: 40mm to 50mm.

Diamonds quilting

For a Diamond quilting, the stitches on the seating area are diamond-shaped. Measurements of the pattern: 50 x 90mm.

Squares quilting

For a Square quilting, the stitches on the seating area are square-shaped. Measurements of the pattern: 50 x 90mm.

Lightnings quilting

For a Lightnings quilting, the stitches on the seating area are lightning-shaped. Measurements of the pattern: 40 x 80mm.


BODY PARTS FINISH AND PAINTING

Nous fabriquons de nombreux éléments de carrosserie, déclinés le plus souvent dans 4 finitions : Brossé, Noir satin (epoxy), Noir brillant (epoxy), Poli miroir et Apprêt epoxy (noir satiné).

Most of the body parts manufactured by BAAK are available in 4 finish levels: Brushed, Satin black (power-coated), Glossy black (powder coated), Polished and Primer-coat (satin black – ready to be painted).